Installed new dispenser flap. Cleaned area as well of mold. Ensured proper operation.

Ordered a door flap to be installed Thursday. Cold air is leaking from that seal. ; schdld next appmnt for 10/16 THU 8-11

Small piece of ice lodged b in the funnel to dispense ice right at the door. Created condensation and a very small leak. Cleaned gunk around the door and cleared ice. No visible signs of leak after cleaning.

Customer reports ice buildup around ice dispenser. Found that the door flap want closing appropriately allowing humid air into the cavity. Found failed solenoid, full of rust. Replaced solenoid, ensured proper function of door flap after installing new part. ; used 1 WR62X10055 (I/M DOOR DISPENSER MOTOR - ICE CRUSHING) from stock

Complaint of not working again. Recently installed drain pump for it not draining. Drain pump is working now. No other problems noted at this time.